GLUING ROBOT

Rutland Plastics glued part
Internal shower part

Rutland Plastics has purchased a Loctite 500 series automated glue dispensing system.  This fully automated gluing robot will enable a variety of parts to be glued consistently and quickly offering a cost-effective joining solution.

The machine was ordered for a new project that required the assembly of two relatively large styrene mouldings with a waterproof joint.  Various joining methods were considered, including sonic welding, but due to the size of the parts, the material involved and joint integrity an adhesive was considered the best option.

In light of the difficulty of applying adhesive to this part manually and the potentially large numbers involved, an automated solution was chosen.  Following advice from Henkel, the Loctite 500 Series was selected.

By coincidence, another project requiring gluing was close to completion – the MindDice®.  This was also considered an ideal candidate for an automated approach.  As Rutland Plastics’ new machine would not arrive in time for the first production batch of the MindDice®, Henkel loaned a demonstration model which is shown in the photo alongside.  This proved to be highly successful and enabled assembly alongside the moulding machine.

This new piece of equipment now opens up other joining capabilities alongside the company’s existing sonic welding service which provides a quick, clean and efficient method of welding plastic parts together with a strong and permanent bond.

At Rutland Plastics, we have the expertise, flexibility and facilities to add the finishing touches required. Sonic welding is just one of the additional services we offer. We are also able to provide machining, gluing and multi-component assembly in addition to our full range of plastic injection moulding services.

 

glue1

Free design guide

Rutland Plastics has produced a free Design Guide to help you with all aspects of designing for plastic injection moulding.
LEARN MORE
04.11.22
Rutland Plastics was featured in the October edition of ‘The Manufacturer’. Jonny Williamson, a...
06.02.23
Rutland Plastics has joined forces with Eureka to produce a Design for Plastic Injection...
08.03.12
In the past, if a metal effect plastic part was required then a secondary process was needed.

KNOWLEDGE BANK

The Rutland Plastics website and knowledge bank contains a wealth of information on plastics and moulding. It not only covers Rutland Plastics itself and the services it offers, but also the injection moulding process, other moulding methods, polymers, designing for plastics, application stories and other articles relating to plastic moulding.

knowledge (4)
knowledge (2)
knowledge (1)
knowledge (3)